Blister machine maintenance

1. Keep clean and sanitary. After shutdown, remove the surrounding debris and dirt in the machine. 2. Each sliding guide column, bearing and sprocket must be kept in good lubrication state, and often lubricated with oil. 3. The water filter in the gas circuit should be watered once per working shift, and the oil mist should be filled frequently to ensure the normal use of solenoid valve and cylinder. 4. Each working shift...

2023-08-11

Main features of blister molding machine

The main features of the product specifications are adaptable and the blister molding method can be used to manufacture various products that are extra large, extra small, extra thick and extra thin. The sheet can be as thin as 1~2MM or even thinner. The product area can be as large as 10 ㎡, as small as several square millimeters, and the wall thickness can be as large as 20mm and as small as 0.1mm. The product has a wide range of applications...

2023-08-11

Performance characteristics of cold water machine

Air-cooled low-temperature chiller-features low-temperature chiller is a special chiller designed for special low-temperature environment. Its super refrigeration capacity provides a reliable guarantee for various low-temperature environments such as food preservation in hotels, restaurants, supermarkets and other commercial places, large-scale cold storage meat, seafood freezing, refrigeration, ice making, food processing freezing/refrigeration, pharmaceutical, chemical and other low-temperature environments. 1. The product range is complete, including high temperature (water temperature -5 ℃), medium temperature (water temperature -10 ℃), low temperature (water temperature -15 ℃) three series. 2. The structure is highly optimized, the heat exchanger plate is used to support the body, the structure is simple, compact and practical. 3. The perfect combination of high-quality high-performance heat exchanger with high-quality screw compressor, the energy efficiency ratio is as high as 4.5. 4. Four-stage or stepless capacity control, accurate with load changes. Water-cooled low-temperature chiller-Features Water-cooled chiller is small in size, large in refrigerating capacity, adopts world famous imported compressors, excellent low-temperature performance, reliable and durable, the product is designed according to the characteristics of industrial application, built-in low-temperature circulating water pump and stainless steel chilled water tank, extremely convenient to use, all materials in contact with water are made of anti-corrosion materials, effectively preventing rust and corrosion, microcomputer LED quantity controller, with temperature display and set temperature, automatic adjustment of frozen water temperature and compressor delay protection function, selection of brand-name contactors, relays and other electrical components, equipped with perfect indicator lights, switches, operation at a glance, built-in electronic water level indicator and alarm device, low water level automatic alarm, operators can grasp the water level of the frozen water tank through the control panel, timely replenishment of water, unique modular design, safe and independent system of each compressor, even if a system problems occur, it will not affect the normal operation of other systems. 1. The compressor of the unit is of medium and low temperature type such as imported brand Maneurop (Meiyoule) of France, Copeland (Copeland)/Carrier (carrier) of the United States, BITZER (BITZER) of Germany, etc. 2. Refrigerants such as R404A,R410a,R22/R407C are used to meet the requirements of refrigeration temperature and environmental protection; 3. Temperature selection range: can provide process chilled water between -5 ℃ ~-60 ℃ (users according to different production needs, choose different water temperature unit specifications; 4. According to the needs of users, can choose a variety of cold carrier (chilled water): ethylene glycol aqueous solution, alcohol, ternary mixed solution and other alcohol cold carrier, can also be designed according to the anti-corrosion requirements of the evaporator, using calcium chloride aqueous solution;

2023-08-11

Refrigeration form of cold water machine

Chiller performance form, can be roughly divided into two kinds of air-cooled chiller-features 1 free cooling tower, easy to install, easy to move, suitable for the lack of water free water tower occasions. 2. Low noise fan motor, excellent cooling and condensing effect, stable throttling mechanism, excellent anti-rust treatment. 3. Adopt high-performance compressor imported from Europe and America, with high EER value, low noise and stable operation. Water-cooled chiller-Features 1. Ergonomic panel, fully automated control, equipped with precision electric temperature controller, can run smoothly for a long time. 2. The use of efficient heat transfer heat exchanger, less loss of cold capacity, easy to return to oil, heat transfer tube does not cause frost cracking advantages. 3. Adopt high-performance compressor imported from Japan and the United States, with high EER value, low noise and stable operation.

2023-08-11

Chiller introduction

In the refrigeration industry, it is divided into air-cooled chillers and water-cooled chillers. According to the compressor, it is divided into screw chillers, scroll chillers, and centrifugal chillers. In the temperature control is divided into low temperature industrial chiller and room temperature chiller, room temperature unit temperature is generally controlled in the range of 0 degrees -35 degrees. The temperature control of the low temperature unit is generally about 0 degrees to -100 degrees.

2023-08-11

Matters needing attention when using the blister machine

1. The power supply must be cut off when the hand reaches under the guide rail for operation, and there can be no accident of turning on the power supply. 2. When the machine uses the secondary upper mold function, please do not put your hand into the molding area to touch the product being cooled, so as to prevent the hand from being crushed when the second upper mold comes down. 3. In the heating area, please do not touch the heating device and baked goods with your hand, when the product length is less than 800mm, the upper gate and the upper die must be synchronized. When the local machine is adjusted, the upper brake should be opened first, and then the upper mold should be opened. 5. When the local machine is adjusted, if the solenoid valve is used to power on for debugging, attention should be paid to whether the power failure will cause damage. 6. When the material receiving piece is sent to the knife switch by hand and the slice position is adjusted, the knife switch should be closed. In the automatic state, hands should not be put into the knife switch cabinet.

2023-08-11

Blister machine operating instructions

1. Turn on the power supply system first 2. Turn on the air source, the air pressure requires 5-6kg 3. Turn on the chiller, and the temperature of the chiller is set to about 10 degrees 4. Press the button ON of the blister power switch to make the three power indicator lights light up at the same time 5. Then press the heating button of the electric furnace to turn on the main light, which means to turn off the electric furnace and adjust each heat control. 6. arrange the mold and occupy the mold with gummed paper.

2023-08-11

Main application of blister machine

1. Plastic packaging industry (blister packaging, plastics, batteries, toys, gifts, hardware, household appliances, electronics, stationery, decoration) 2. Food packaging industry (snack boxes, fruit trays, biscuit boxes) 3. Cooling water guide plates for industrial cooling towers 4. Manufacturing industries such as three-dimensional relief patterns for decoration, plastic ceilings, wall panels, automotive materials, sanitary equipment, etc. 5. Suitable for the production of various color sheets: polyethylene PS, polyvinyl chloride PVC, plexiglass, ABS, polymethyl methacrylate; Flocking sheet; Environmental protection sheet APET, PET, PP, etc.; Photodegradable materials; Biodegradable materials and other plastic products.

2023-08-11